|
| Best Rust Penetration Study |
 Received an email from Marcus at http://go.jeep- xj.info:
"This information comes from another group but thought it was worth putting up here as well.
Machinist's Workshop magazine tested penetrants for break out torque on rusted nuts. They arranged a subjective test of all the popular penetrants with the control being the torque required to remove the nut from a "scientifically rusted" environment. The results are as follows;
Penetrating oil..... Average load
None ............ ......516 pounds
WD-40 ............ ....238 pounds
PB Blaster ............ 214 pounds
Liquid Wrench ..... 127 pounds
Kano Kroil ............ 106 pounds
ATF-Acetone mix....53 pounds
The ATF-Acetone mix was a "home brew" mix of 50-50 automatic transmission fluid and acetone.
|
|
|
|
| |
|
